Stinger II Specs.

    
                 

   

 
   

The Stinger II From CAMaster is the predecessor to the MC Series Routers. The Stinger like the MC is built on a stand alone table base that is welded and then powder coated to give it a industrial finish from top to bottom.

The Stinger II is a extension to the CAMaster family of routers that fills a gap between the table top Stinger and the Cobra Series router. The Stinger II is ideal for a shop that could use a CNC router as a complement to its production line. Built on the same principals as the Cobra the Stinger II can handle a wide verity of applications like 3D signage and more.

The Stinger II is a great machine for someone who needs the versatility of  a CNC router with a larger cut area than the table top Stinger, but who does not have the production needs that would require a larger faster and more expensive machine.

Built with hobbyist and Sign Shops in mind the Stinger II CNC Router is hitting its mark. And offers a industrial quality machine that has many options to choose from for a very attractive price.

 

  
     

Stinger II 36x48

  • Cut Area - 36" X 48" X 5"
  • Over All Dimensions - 45" X 66"
  • Router Weight - 700 lbs (Approx)
  • Shipping Weight - 1000 lbs (Approx)

Stinger II 48x48

  • Cut Area - 48" X 48" X 5"
  • Over All Dimensions - 58" X 66"
  • Router Weight - 800 lbs (Approx)
  • Shipping Weight - 1100 lbs (Approx)

Stinger II 48x96

  • Cut Area - 48" X 96" X 5"
  • Over All Dimensions - 58" X 115"
  • Router Weight - 1200 lbs (Approx)
  • Shipping Weight - 1500 lbs (Approx)

 

Standard Features

  • Rapid Speeds - X & Y 500 ipm - Z 400 ipm
  • Welded Steel Table with Powder Coat Finish
  • Rack & Pinion on XY & Z
  • Nema 23 Step Motors with Softstep Drive System
  • MDF Table Top
  • Working Table Height - 34.75"
  • Limit Switches on All Axies
  • Dust Boot
  • E-Stop (On Front of Machine)
  • Porter Cable 2.25 HP Router Variable-speed *
  • Cut 2D Design Software *
  • Windows Based Controller (Includes - PC, Keyboard, Mouse, & Flat Panel Monitor) Pre Loaded with WinCNC Control Software and Tested*
  • Power Requirements: - 2 Circuits 115V Single Phase with 20A Service (One for PC & CNC, One for Router)
  • Warranty: - 1 Year Parts & Labor

* Upgradable Items

 

    

   
         

   

Stinger Available Options

3.25 HP Porter Cable Variable Speed Router

  • Need more power but on a budget? The 3.25 HP Porter Cable is a great way to increase the HP on the Stinger II and keep the same power requirements.   .

1 KW (1.34 HP) HSD/SEV ER20 Collet Spindle

  • Description - Ultra quite high performance. A spindle upgrade not only takes noise out of the shop it adds value to your router. The Stinger is an industrial quality CNC Router made for the small shop or hobbyist. Add this option to it and you have a small format CNC that is capable of running long shifts without stress to bearing and other components. Power Requirements are 115V 20A Service. (Up to a 1/2" shank size) 

1.7 KW (2.28 HP) HSD/SEV ER25 Collet Spindle

  • Description - Just as the option above the 1.7 KW gives you more power at the bit. This option also gives you a larger collet size that will accommodate a bit shank up to 5/8" Power Requirements are 220V Single Phase 20A Service.

T-Slot Clamping Table

  • Description - The T-Slot Clamping Table gives the Stinger the bite to hold down your parts. Four flush mounted aluminum slots give the Stinger a wide range of holding points. Four heavy duty knobbed clamps included. 

Recoil Indexing Lathe

  • Description - The Recoil like the larger version on the Cobra Series Routers is a woodworking lathe that has been fitted with a high torque step motor & driver. This motor/driver combination gives the Recoil lathe the ability to break down the segments of a cylinder in to degrees. Unlike traditional lathes that spin without stopping the Recoil can rotate stop and change directions many times in a file. This ability helps 3D software like Aspire and others to control the lathe and make wonderful 3D carved turnings. 

WinCNC Control System Standard

  • Description - WinCNC control software is an industrial controller that gives the Stinger the ability to truly be an production CNC. CAMaster also offers its Remote Technician Support (RTS) with this option. 

  • All WinCNC systems are tested by our technicians with your router and control PC. 

V-Carve Pro

  • Description - Upgrade from Cut 2D to V-Carve Pro and you will have the ability to use VectorArt 3D files, nesting, V-Carving and more.

Photo V-Carve Pro

  • Description - PhotoVCarve instantly converts photographs and images into high quality toolpaths that can be run on your Sringer. One great example of this would be Lithophanes.

Aspire

  • Description - Upgrade to Aspire to have the ability to perform 3D modeling. Aspire comes with a disk with 7 hours of training and 50 free 3D models from VectorArt 3D.

 

More options available please build a quote with the specs you need on your very own Stinger CNC Router from CAMaster.